We compare published specs and prices. When you buy through our links, we may earn a commission. How we research
INFRARED SAUNA FOR HOME

Home / Guides / Cost and upkeep

How much electricity does an infrared sauna use?

The answer fits in one formula: power times time times your rate. Here are the usual power figures by size and worked examples you can redo with your own bill.

Updated November 20, 2026 · Specs compared from published manuals, not tested in person

Empty wooden sauna benches in warm light

Short answer. A home infrared sauna typically draws about 1 to 3.5 kW depending on size, and a session uses about 1 to 2.5 kWh. For a 1.8 kW two person cabin used 12 times a month for 45 minutes, that is about 16 kWh, or roughly $2 to $5 a month at the example rates used below.

Key facts

  • A home infrared sauna typically draws about 1.0 to 1.5 kW for a 1 person cabin, 1.5 to 2.2 kW for a 2 person cabin and 2.5 to 3.5 kW for a 4 person cabin.
  • A 1.8 kW 2 person infrared sauna that runs for 45 minutes, warm-up included, uses at most about 1.35 kWh of electricity.
  • At an example rate of 17 cents per kWh, a 1.8 kW infrared sauna used for 45 minutes costs about 23 cents per session and about $2.75 per month for 12 sessions.
  • The electricity cost of an infrared sauna session equals the heater power in kW, multiplied by the hours it runs, multiplied by the price per kWh.
  • A 1.8 kW infrared sauna used every day for 45 minutes uses about 40 kWh per month, which costs about $12 at an example rate of 30 cents per kWh.

How many kW does an infrared sauna draw?

It depends on the size of the cabin. Most home models fall between about 1 kW for a single seat and 3.5 kW for a four seat cabin.

Cabin sizeTypical powerUsual supply
1 personAbout 1.0 to 1.5 kW120 V outlet
2 personAbout 1.5 to 2.2 kW120 V, dedicated 15 or 20 amp circuit
3 personAbout 2.0 to 3.0 kW120 V on a 20 or 30 amp circuit, or 240 V
4 personAbout 2.5 to 3.5 kW or moreOften 240 V

These are common ranges. The real figure is on the specification sheet and on the rating label of the cabin, in watts. Divide by 1,000 to get kW. The supply side is covered in infrared sauna electrical requirements. Have a licensed electrician confirm what your panel can take.

What is the formula?

Electricity used equals power multiplied by time. Cost equals electricity used multiplied by your rate.

  • kWh per session = kW × minutes ÷ 60
  • Cost per session = kWh per session × price per kWh
  • Cost per month = cost per session × sessions per month

Count the warm-up in the minutes. If the cabin preheats for 15 minutes and you sit for 30, use 45.

Example: 1.8 kW × 45 ÷ 60 = 1.35 kWh. At 17 cents per kWh, that is 1.35 × $0.17 = about 23 cents.

How many kWh does one session use?

Usually about 1 to 2.5 kWh. The table assumes the heaters run at full power for the whole time, which is the upper limit.

Cabin power30 minutes45 minutes60 minutes
1.3 kW (1 person example)0.65 kWh0.98 kWh1.30 kWh
1.8 kW (2 person example)0.90 kWh1.35 kWh1.80 kWh
2.4 kW (3 person example)1.20 kWh1.80 kWh2.40 kWh
3.0 kW (4 person example)1.50 kWh2.25 kWh3.00 kWh

Real use is often a little lower. Once the cabin reaches the set temperature, the heaters cycle on and off to hold it.

How much does an infrared sauna cost to run per month?

For most homes, a few dollars. The table below uses 45 minute sessions, 12 sessions a month (three a week) and three example electricity rates.

The rates are examples only: 13 cents per kWh stands for a low rate area, 17 cents for a mid range rate and 30 cents for a high rate area. Your own rate is on your electric bill. Divide the total charge by the kWh used if you want a figure that includes delivery fees.

Cabin powerkWh per monthAt 13 centsAt 17 centsAt 30 cents
1.3 kW11.7$1.52$1.99$3.51
1.8 kW16.2$2.11$2.75$4.86
2.4 kW21.6$2.81$3.67$6.48
3.0 kW27.0$3.51$4.59$8.10

Worked example: daily use

Take the 1.8 kW cabin and use it every day, 30 sessions a month, 45 minutes each.

  1. 1.8 kW × 0.75 hour = 1.35 kWh per session.
  2. 1.35 kWh × 30 sessions = 40.5 kWh per month.
  3. 40.5 kWh costs about $5.27 at 13 cents, $6.89 at 17 cents and $12.15 at 30 cents.

Worked example: a large cabin, two long sessions a week

Take a 3.0 kW four person cabin, 60 minutes including warm-up, 8 sessions a month.

  1. 3.0 kW × 1 hour = 3.0 kWh per session.
  2. 3.0 kWh × 8 sessions = 24 kWh per month.
  3. 24 kWh costs about $3.12 at 13 cents, $4.08 at 17 cents and $7.20 at 30 cents.

To run your own numbers without a pencil, use the calculator on the infrared sauna cost page.

What makes the real figure higher or lower?

  • Room temperature. A cabin in a cold garage or basement preheats longer and cycles less.
  • Preheat habits. Switching on 40 minutes ahead when 15 would do adds to every session.
  • Set temperature. A lower setting means the heaters rest more once the cabin is warm.
  • Extras. Lights and audio draw very little next to the heaters.
  • Time of use rates. If your utility charges more in the evening peak, the hour you use the sauna changes the rate to plug into the formula.

How does that compare with a traditional sauna?

An infrared cabin uses several times less electricity per session. A traditional electric heater commonly draws 4.5 to 9 kW and preheats for 30 to 45 minutes before anyone steps in. A 6 kW heater that runs for 75 minutes uses up to 7.5 kWh, against 1.35 kWh in the 1.8 kW infrared example. The full comparison is in infrared vs traditional sauna.

How can you measure your own sauna?

For a 120 volt plug-in cabin, a plug-in watt meter rated for the cabin's amps will show the kWh used in a session. Check the meter's rating before you use it, since many are limited to 15 amps. For a 240 volt or hardwired cabin, ask your electrician about a circuit level monitor, or compare your utility's hourly usage data on days with and without a session.

Common questions

How much electricity does an infrared sauna use per session?

Usually about 1 to 2.5 kWh. A 1.8 kW cabin that runs for 45 minutes including warm-up uses at most 1.35 kWh, and often a little less because the heaters cycle once the cabin is warm.

How much does an infrared sauna cost to run per month?

For a 1.8 kW cabin used 12 times a month for 45 minutes, about $2.11 at 13 cents per kWh, $2.75 at 17 cents and $4.86 at 30 cents. Daily use costs about two and a half times that.

How many watts does a 2 person infrared sauna use?

Typically about 1,500 to 2,200 watts. The exact figure is on the specification sheet and on the rating label of the cabin.

Does an infrared sauna use more electricity than a traditional sauna?

No, it uses less. A traditional electric heater commonly draws 4.5 to 9 kW and preheats for 30 to 45 minutes, so a session uses several times more electricity than an infrared session.

Does an infrared sauna use power when it is off?

Only a very small standby draw for the control panel, if any. If you want zero, switch the cabin off at its power switch or unplug it between sessions, as long as the manual allows it.

Use the 30 second finder →

Keep reading

All 21 guides