We compare published specs and prices. When you buy through our links, we may earn a commission. How we research
INFRARED SAUNA FOR HOME

Home / Explainer

Low EMF infrared sauna: how to check the claim

Almost every infrared sauna is sold as low EMF. The words mean little without a number, a distance and a lab report.

Updated November 20, 2026 · Specs compared from published manuals, not tested in person

Person sitting on the bench of a glass-fronted sauna cabin

Short answer. "Low EMF" has no legal definition. Treat it as a claim to verify: ask for the measured value, the distance from the heater and the name of the lab that did the test.

What EMF is

EMF stands for electric and magnetic fields. Anything that carries electricity produces them: wiring, hair dryers, ovens, and the heaters in a sauna. In sauna marketing the number quoted is nearly always the magnetic field, measured in milligauss (mG).

Two things are worth knowing. Fields drop quickly as you move away from the source. And in a sauna you sit close to the heaters, for a long time, which is why buyers ask about it.

What the numbers mean

Brands that publish figures often quote less than about 3 mG at the seating position. For scale, the international guideline for public exposure at household power frequencies, published by ICNIRP in 2010, is 2,000 mG. A normal sauna is far below that limit either way.

So the label is less about safety limits and more about engineering care. Low readings usually come from heaters and wiring designed so that fields cancel out, and from shielding the cables in the walls.

Five questions to ask the seller

  1. What is the reading, in milligauss? "Low" or "near zero" is not an answer.
  2. Where was it measured? A reading at the bench where you sit is useful. A reading taken a few feet from the cabin is not.
  3. Was every heater tested? Floor and leg heaters sit closest to your body.
  4. Who did the test? An independent lab report with a date and model number beats an in-house chart.
  5. Does it cover electric fields too? Some brands publish both, sometimes labelled "low ELF".

Red flags

  • "Zero EMF". Any working electrical heater produces some field.
  • A report for a different model, or with no model number at all.
  • Health promises attached to the EMF figure.

How much weight to give it

Use EMF data as one sign of a careful manufacturer, next to wood quality, heater warranty and electrical certification such as an ETL or UL listing. A brand that publishes full third party reports is usually open about the rest as well.

Next, see what full spectrum means, another label that often sits beside this one.

Common questions

What does low EMF mean on a sauna?

It means the seller says the electric and magnetic fields around the heaters are low. There is no official threshold for the label, so each brand sets its own.

What EMF level do sauna brands advertise?

Many advertise magnetic fields under about 3 milligauss where you sit. The figure only means something if you know where and how it was measured.

Can I measure EMF myself?

Yes. A consumer gauss meter gives a rough reading of magnetic fields. Measure at the bench and at back height with the heaters on, and compare with a reading taken with the sauna off.

Keep reading